When you want to heat a large room, a space heater is a recommended device that can give the best results. Though they are used to heat spaces, these devices are best for supplementing an existing heating system. They usually use radiant or convection heat to warm up the surrounding air, and can be either powered by gas or electricity. Most of them have adjustable timers and thermostats to allow efficient heating.
Convection heaters utilize a heating element to warm the heats oil or air, and some use fans to drive the heated air into the cold space. In other models, the heater can rotate to distribute the heated air within a space. However, the convection heaters that use oil may take a while before heating up, and the temperature on their surfaces cannot stay much longer compared to the air based convection heaters. But top quality oil filled heaters will keep the heat more than others.
On the other hand, radiative heaters function like the halogen bulbs, though they produce heat in the spectrum. This means they can heat the object around, rather than heating the surrounding air. Even though this makes them more efficient, they are not as attractive as their counterparts!
Space Heating Ways Explained
Using the Electric Toe-Kick Space Heaters
They are small in size with blowers and are usually fitted under the stair treads, vanities or kitchen cabinets. If you have a spacious bathroom or kitchen where the floor is extremely cold, this space heater can be a better option. A toe-kick heater also referred to as a kick space heater, is installed under the cabinet. The heater is powered through running a circuit from a main electrical board. The units come with a high/low-temperature setting, which can be controlled using a thermostat or switch. There are powerful units that can blow too hot when the high setting is switched on. When the unit is left to run for hours at a high temperature, your soft vinyl floor is likely to be softened.
Using Duct Booster Fans
The booster fans are usually used if you need to distribute the flow of the heated air. The heated air is directed to the cold room in a more uniformed manner. For your information, the fans can fit properly inside a standard metal duct. The blower is mounted near an outlet end of the duct, and a pressure switch is then installed. The switch can sense the furnace’s air pressure so that the booster fan turns on once the A/C blower is on.
The Cove Heaters
These are mounted on the ceiling such that your visitors cannot see them. They can be a great option for those who have large bedrooms or sitting rooms because they don’t make noise – they do not use fans. Since they are radiant space heaters, the heat is emitted downward such that it warms people directly instead of warming the surrounding air. They are also safe for the families with kids as they are mounted on the ceiling, and work best in rooms where furniture and drapes are inconvenient for space heaters. In addition, cove heaters can be controlled using smart thermostats.
Using the Electric Floor Heaters
If you want to heat your kitchen space or a cold washroom, the under-tile radiant heaters can offer a better option. However, some companies sell systems that function well beneath the carpet, laminate and engineered floor. These radiant systems come in two types; loose wires and mat systems. The loose wires can be installed across a floor while the mat system’s wires are pre-arranged inside a fabric or mesh mat.
Using the Radiant Ceiling Boards
The radiant ceiling boards are installed just like the cove heaters. They are mounted on the ceiling and can be efficient because you can direct heating towards a specific area of a larger room. Interestingly, they heat up air quickly and cool down fast. Due to the flexible nature of these panels, you can just mount it directly above your working area or table in order to increase comfort without consuming a huge amount of energy for heating the entire space.
In conclusion, it is important to understand the trick before buying a space heater. If the room has been cold all through, you need to check the windows, ductwork, and walls if are appropriately insulated. However, if space has not been cold it means the heating system is not functioning properly. The task of troubleshooting can be hectic – therefore call a professional HVAC repairer.